DIY Phone
Aus HaSi Wiki
Version vom 2. Oktober 2017, 22:36 Uhr von Fab Lab Fabulous St. Pauli (Diskussion | Beiträge)
Diyup Release status: beta [box doku] | |
---|---|
Description | DIY Phone selber bauen |
Hut | nanooq |
Kontakt | nanooq@hasi.it |
Liga der Vorstreckenden | smeik, moe, nanooq |
Last Version | 0.2 (1) |
Platform | ATmega1284P (TQFP44), Quectel M10 |
License | CC-BY-NC-SA |
Das DIY Cellphone von Dan Mellis. Wir haben es nachgebaut und erfolgreich im GSM-Netz angerufen und Anrufe erhalten (Lycamobile <-> n). Wir arbeiten gerade an einem Gehäuse und danach wollen wir die Codebase erweitern oder Features einbauen.
Inhaltsverzeichnis
Beschaffung
- Bei pandtron M10 Quectel gekauft
- Bei SparkFun bestellt
- Bei DigiKey Kram gekauft (105,87 USD)
- Bei OSH-Park LCD-Platine kaufen (Stand 2015-08-01: 3 für 59,25 USD)
Links
- LED Platine (OSH Park)
- BOM.pdf
- DIY Cellphone
- Mellis
- ATmega 1284
- GitHub
- Quectel M10(GSM/GPRS-Module
- [1] ausführliche Anleitung zum Bau beim Fab Lab in Hamburg (Fábrica)
BOM-Tabelle
Bitte beachte die [Diskussion:Diy-phone#BOM_Tabelle_-_nanooq | Diskussionsseite]] dazu.
Part | Package | Supplier | Part Number | Menge | Kosten | Summe |
---|---|---|---|---|---|---|
22 ohms | R1206 | DigiKey | 311-22ERCT-ND | 3 | ||
10K | R1206 | DigiKey | 311-10KERCT-ND | 1 | ||
4.7K | R1206 | DigiKey | 311-4.7KERCT-ND | 2 | ||
2K | R1206 | DigiKey | 311-2.0KERCT-ND | 1 | ||
470 ohm | R1206 | DigiKey | 311-470ERCT-ND | 2 | ||
0 ohm | R0603 | DigiKey | 311-0.0GRCT-ND | 1 | ||
18 pF | C1206 | DigiKey | 399-1195-1-ND | 2 | ||
33pF | C1206 | DigiKey | 399-1199-1-ND | 3 | ||
4.7uF | C1206 | DigiKey | 399-1262-1-ND | 2 | ||
10pF | C1206 | DigiKey | 399-1192-1-ND | 3 | ||
0.1uF | C1206 | DigiKey | 399-1249-1-ND | 3 | ||
1000uF | D/7343-31R | DigiKey | 399-5123-1-ND | 2 | ||
SuperCap | 414-VA5R | DigiKey 1 | 587-2158-1-ND | 1 | ||
LED | 1206 | DigiKeyMouser | 754-1144-1-ND | 2 | ||
ISP Header (2x3 0.1” male header pins) | DigiKey | 609-3218-ND | 1 | |||
Diode (SOD123) | SOD123 | DigiKey | 1N4448W-FDICT-ND | 1 | ||
Crystal (8 MHz, 18 pF) | 2-SMD (5.0 x 3.2 mm) | DigiKey | 535-10630-1-ND | 1 | ||
ATmega1284P (TQFP44) | TQFP44 | DigiKey | ATMEGA1284P-AURCT-ND | 1 | ||
Electret Microphone (6mm diameter x 2.4mm) | WM-64PC/64PK | DigiKey | 102-1727-ND | 1 | ||
Speaker (55.5 ohm, 6.4 mm) | DigiKey | 423-1142-ND | 1 | |||
Button (SMD, JLead) | BUTTON_6MM_JLEAD | DigiKey | EG4374CT-ND | 16 | ||
Button (SMD-2) | DigiKey | SW1020CT-ND | 1 | |||
Transistor (NPN, SOT23) | SOT23-BEC | DigiKey | MMBT3904LT1GOSCT-ND | 1 | ||
Buzzer (Magnetic, 3V) | PUI-SMT-0540 | DigiKey | 668-1061-1-ND | 1 | ||
LiPo Charger IC | SOT23-5 | Mouser | MCP73831T-2ACI/OTCT-ND | 1 | ||
Antenova A10340 | DigiKey | 627-1022-1-ND | 1 | |||
LED Display (8 characters, 5x7, red, 3.3V) | DigiKey | 516-2568-ND | 1 | |||
Quectel M10 | [2] | C000049 | 1 | |||
SIM Socket | Sparkfun | PRT-00548 | 1 | |||
JST 2-Pin Connector (2mm) | JST-2-SMD | Sparkfun | PRT-08612 | 1 | ||
FTDI Header | PINHD-1X6/90 | Sparkfun | PRT-00553 | 0.1667 | ||
USB-MINIB-5PIN | USB-MINIB | Sparkfun | PRT-00587 | 1 | ||
LiPo Battery (3.7V, 1000 mAh) | Sparkfun | PRT-00339 | 1 |
Kostenaufstellung
Beschreibung | Kosten |
---|---|
3 Platinen | 59,25 USD |
DigiKey, LEDs bis zu 30 Tage abwarten Datei:2015-07-03.pdf | 105,87 USD |
Mouser, LEDs direkt geholt Datei:2015-07-03 mouser.pdf | 2,76 EUR |
Sparkfun | 36,37 USD |
Pandatron | 25,94 EUR |
Summe | 201,49 USD (EUR) + 28,70 EUR |
Bilder
Diese Bilder sind durch Internetsuche gefunden worden. Quelle: Internet.